SG-12 Smoke generator - Technical specifications

The base is a heavy cast iron plate.

The base is supported by formed stainless steel legs with height adjustable feet.

The internal oven components; char plate and wipers, are cast iron.

The drive components are hardened steel.

The 1/3 HP motor operates sawdust agitator and char plates.

All sheet metal fabrications are stainless steel.

The electrical enclosures; control and heater termination, are NEMA 4X stainless steel.

The oven contains high efficiency ceramic fiber insulation.

Features Benefits
Overall dimensions and weight Net Weight 950 lbs. [431 kg.] Overall Height 63.0" [1700 mm]Overall Width 68.0" [1727 mm]Overall Depth 48.0" [1220 mm]
Hopper Capacity 60 lbs. [27 kg.] sawdust level with rim 63 lbs. [29 kg.] sawdust domed above hopper rim
Operating Capacity 1,100 FPM (feet per minute) [335 MPM (meters per minute)] velocity of smoke at smoke tube cone 11.4 CFM (cubic feet per minute) [323 LPM (liters per minute)] volume rate of smoke
Operating RPM Motor: 6.0 RPM
Agitator 2.4 RPM counterclockwise
Sawdust Type Indicates heater malfunction ensuring consistent production performance
Sawdust Feed Rate Variable rate from 5 to 26 lbs. [2.3 to 11.8 kilos] per hour
Electrical 230 or 460 Volt - 30/15 Amp - 60 Hz – 3-Phase.The above voltages are standard. Other voltages are available. Contact us.
Suction Requirements 0.05 to 0.25 inches of water column
Water 1 to 3 GPM (gallons per minute) [3.8 to 11.4 LPM (liters per minute)] at 20 PSIG (minimum). [140 kPa (minimum)

Main menu

Get in touch with us​

We can be contacted by phone from monday to friday, from 8:00 to 15:30. If you call out of telephone hours, the call is forwarded to our cell phones.

tegetec Denmark

tegetec Spain

tegetec Finland